Phone Intercoms

Integrated Phone – Intercom

You no longer need another separate intercom system with cumbersome stations mounted in multiple locations throughout walls of your premises, you can have an attractive door/gate station fully integrated with your existing cordless phone handsets or telephone system.  This range of stainless steel door/gate stations in conjunction with the correct integration module can provide convenient answering of the door/gate wherever your cordless phones are inside or outside.  This equipment also has the option for remote door/.gate release if required.

 

Door/Gate – Intercom -DP2

This Flush Mounting Door Station can be integrated with your existing telephones to provide a very practical and attractive intercom solution for your home or business.

  • Flush mounting stainless steel gate/door phone – compact size.
  • Vertical & Horizontal Surface Mounting.
  • High Quality 316 marine grade stainless steel fascia.
  • Premium audio clarity and volume
  • Capacitive ‘touch switch’ activation

 

 

 

 

Door/Gate  Intercom DP5 – with Keypad

This Flush Mounting Door Station includes a keypad for convenient PIN code access to a Door/gate while also being integrated with your existing telephones to provide a very practical and attractive intercom solution for your home or business.

  • Flush mounting gate/door phone
  • Incorporates an integrated touch sensitive pedestrian PIN access keypad
  • High Quality 316 marine grade stainless steel fascia.
  • Premium audio clarity and volume
  • Capacitive ‘touch switch’ activation

 

Door/Gate – Intercom with Camera DP3

This Flush Mounting Door Station includes a camera mounting option so it can be integrated with your existing telephones and CCTV to provide a very practical, attractive and secure intercom solution for your home or business.

  • Flush mounting stainless steel gate/door phone.
  • Mounting facility for a camera (camera supplied separately)
  • High Quality 316 marine grade stainless steel fascia.
  • Premium audio clarity and volume
  • Capacitive ‘touch switch’ activation

 

Connect 1-2 Gate/Door Phones
to Telephone Landline

These Door Station controllers are designed to operate with your PSTN landline. They are also suitable for sites that do not use a telephone line, such as VOIP users or premises that only use Mobile Phones.

1 or 2 of the Gate/Door Phones can be connected direct to the door station controller which intern connects to your existing telephones. The Gate/Door Phones can be up to 300 metres from the controller (the total distance of 1 or 2 door phones).

When a visitor presses the call button on the door phone, the controller will RING all the TELEPHONES on your line with a different ring so that you will know the call is from the door phone. All you need to do is to answer any telephone to achieve loud and clear communication with your visitor. There are no call charges.

If you are already on a telephone call, the controller will alert you with a call advise tone every 15 seconds. You can then place your telephone call ON HOLD and speak to your visitor by pressing ##. You can then return to your telephone caller when ready by pressing ## again. Similarly, if you are on a door phone call when an incoming telephone call is present the same procedure applies.

Door Station controller DS2 incorporates an internal relay which can be used to open or release a door or gate lock. Lock release time is fully programmable.  The  DS3 controller provides two internal relays which can be used to open locks in two separate areas (eg; one at your front gate and one at your rear door). The second relay in both these models can alternatively be used as an aux to switch on a light or any other electrical device as soon as the call button is pressed on the door phone and then SWITCH THEM OFF after the call is complete.

 

 

Door Station controllers DS4, DS5 and DS6 are designed to connect to an analogue extension of your PABX or other multi-line telephone system.

You can then connect ONE or TWO of the Gate/Door Phones direct to the controller. The door phones can be up to 300 metres from the door station controller (the total distance of 1 or 2 door phones).

When the call button of either door phone is activated, the DS4 or DS5 unit will generate an off hook condition to your PABX, which can then direct your door phone call as required. (The PABX should be set to HOTDIAL this extension).

Model DS6 can dial through to a pre-programmed internal or external number, if your PABX cannot.  The door station controller will then terminate the call as soon as the called party hangs up.

Communication is loud and clear, just like a phone call and there are NO call charges, unless the call is routed to an external number.

Model DS5 incorporates an internal relay which can be used to open or release a door or gate lock. Lock release time is fully programmable.

Model DS6 provides two internal relays which can be used to open locks in two separate areas (eg; one at your front gate and one at your rear door).